Balance power and portability with the L1 Pro system optimized for both on-the-go simplicity and expanded bandwidth, ideal for small-to-medium sized clubs, bars, and other venues

J-shaped line array featuring 16 articulated 2” neodymium drivers; 180-degree horizontal coverage, tight vertical control on top, wide dispersion on the bottom to cover audiences whether set up on the floor or an elevated stage, even off to the extreme sides in medium to large venues

Deliver premium full-range sound with consistent tonal balance for singer-songwriters, mobile DJs, small ensembles, and more

Maintain supreme vocal and instrument clarity with a J-shape extended-frequency line array featuring 16 articulated 2” neodymium drivers and wide 180-degree horizontal coverage

Bring more bass with less bulk with an integrated 10” × 18” high-excursion neodymium RaceTrack woofer; performance that rivals traditional round drivers with a smaller footprint

Go from vehicle to venue easily with a modular three-piece system that’s easier to pack, carry, and set up

Select between optimized system EQ presets for live music, recorded music, and more

Connect various audio sources easily via built-in mixer with two combo XLR-1/4” phantom-powered inputs, 1/4" and 1/8" (3.5 mm) aux input, plus Bluetooth® streaming — and access system EQ and ToneMatch presets, volume, tone, and reverb via illuminated controls

Add in even more instruments and other audio sources via dedicated ToneMatch port; one cable provides both power and digital audio between the system and a Bose T4S or T8S mixer (optional)

Take wireless control with the L1 Mix app on your smartphone to adjust settings instantly from your phone, roam the room and fine-tune, and access the ToneMatch library of custom EQ presets

Stream high-quality Bluetooth® audio from compatible devices

 Technical Specifications
System Performance
Model Name L1 Pro16
System Type Self-powered line array with integrated bass module and onboard three-channel digital
mixer
Frequency Response (–3 dB) 1 42 Hz to 16 kHz
Frequency Range (–10 dB) 31 Hz to 18 kHz
Nominal Vertical Coverage Pattern 0°/30°
Vertical Beam Type J-shape
Nominal Horizontal Coverage Pattern 180°
Calculated Maximum SPL @ 1 m,
continuous 2 118 dB
Calculated Maximum SPL @ 1 m, peak 2 124 dB
Crossover 200 Hz
Transducers
Low Frequency 1 × RaceTrack low-frequency driver 10" x 18"
Low Frequency Voice Coil Size 3"
High / Mid Frequency 16 × Articulated 2" drivers
High / Mid Frequency Voice Coil Size 3/4"
Driver Protection Dynamic limiting
Amplification
Type Two-channel, Class D
Low Frequency Amp Channel 1000 W
High / Mid Frequency Amp Channel 250 W
Cooling Convection cooling
Onboard Mixer
Channels Three
Channel 1 & 2 Input: Audio Type Combination XLR or 1/4" TRS connector (mic/instrument/line)
Channel 1 & 2 Input: Input Impedance 10 KΩ (XLR); 2 MΩ (TRS)
Channel 1 & 2 Input: Trim 0 dB, 12 dB, 24 dB, 36 dB, and 45 dB analog gain steps automatically selected and com-
pensated by DSP
Channel 1 & 2 Input: Channel Gain –100 dB to +75 dB (XLR); –115 dB to +60 dB (TRS); from input to driver, controlled by
volume knob
Channel 1 & 2 Input: Max Input Signal +10 dBu (XLR); +24 dBu (TRS)
Channel 3 Input: Audio Type 1/8" TRS (stereo-summed, line), 1/4" TRS (line), Bluetooth® audio streaming
Channel 3 Input: Input Impedance 40 KΩ (3.5 mm); 200 KΩ (TRS)
Channel 3 Input: Channel Gain –105 dB to +50 dB (3.5 mm); –115 dB to +40 dB (TRS); from input to driver, controlled
by volume knob
Channel 3 Input: Max Input Signal +11.7 dBu (3.5 mm); +24 dBu (TRS)
ToneMatch: Audio Type RJ-45 connector for ToneMatch cable connection, providing digital audio and power
connection for the optional T4S/T8S ToneMatch Mixer
Output: Audio Type XLR connector, line level, full-frequency bandwidth
Bluetooth Enabled Yes
Bluetooth Types AAC or SBC for audio streaming, LE for system control
Channel Controls 3 digital rotary encoders
Phantom Power Channel 1 & 2
LED Indicators Standby, Channel Parameters, Signal/Clip, Mute, Phantom Power, ToneMatch, Bluetooth
LED, System EQ

Technical Specifications
AC Power
AC Power Input 100–240 VAC (±20%, 50/60 Hz)
Input: Electrical Type IEC
Initial turn on inrush current 15.7 A at 120 V; 28.4 A at 230 V
Inrush current after AC mains interruption
of 5 s 2.4 A at 120 V; 8.1 A at 230 V
Physical
Color Black
Enclosures Material Power stand: High-impact polypropylene
Extension & Array: High-impact ABS
Grille Material Powder-coated perforated steel
Product Dimensions (H × W × D) 2011 × 355 × 456 mm (79.2 × 14.0 × 18 in)
Shipping Dimensions (H × W × D) 1118 × 460 × 650 mm (44.02 × 18.11 × 25.59 in)
Net Weight 3 23.0 kg (50.6 lbs)
Shipping Weight 28.4 kg (62.6 lbs)
Included Accessories Carry bag for arrays, IEC power cord